Fitness Equipment – How Often Should You Be Changing Your Running Shoes?

When most people think of workout “gear,” it is relatively simple and straightforward. You need…

workout clothes,
headphones,
a music player,
a water bottle and
a pair of running shoes.
Sounds simple enough right? When it comes to running shoes, though, you need to remember you need to get good quality shoes built for the type of activity you are doing. Plus you need to ensure you are changing your shoes often enough, so they are providing the cushioning and support you need.
How often should you be changing your running shoes? Let us go over a few things, so you are aware of the best time to switch to a new pair…

1. Your Running Mileage. The biggest factor determining your running shoe lifespan is how many miles you have traveled. Consider the average pair of running shoes should give you around 300 to 500 miles worth, this can give you a relatively good indication of how long you can go. If you are running an average of 20 miles a week, this should amount to around 15 to 25 week’s worth of usage.

Keeping track of your miles, both those run and walked, is important so you know when your time is up with that pair of running shoes. If you are doing most of these miles on the treadmill, your shoes may look brand new, but keep in mind the padding in them may be anything but new!

2. Your Body Weight. The next factor to think about is your body weight. Generally speaking, the heavier you are, the faster your shoes will wear out. There will be more stress coming down with each step you take, mostly wearing out the padding as you run.

If you are over 150 pounds, you might only get the 300-mile mark with your shoes, while if you are under 150 pounds, you may be closer to the 500-mile mark.

You will need to judge for yourself how your shoes are feeling as you run in them day after day. If you start noticing sore and achy joints, this is a good sign it may be time to change those shoes for a new pair.

3. Where Are You Running? Finally, think about where you are running. Are you running primarily in open areas or are you running in forests and off-road trails? If it is essentially flat ground running you are doing; you may get a little more life out of your shoes compared to if you are running on terrain not as even. The support and stabilization of your shoe will be tested more in those scenarios, thus leading to faster wear and tear.

Keep these points in mind as you go about your workout sessions. Having a good pair of running shoes is vital to your success, so it is essential you do not overlook this critical element.

Although managing Type 2 diabetes can be very challenging, it is not a condition you must just live with. Make simple changes to your daily routine – include exercise to help lower both your blood sugar levels and your weight.

Posted in Uncategorized | Comments Off

Rowing Machine: Just One Way to Get More Calories Out

Tired of long distance running and workouts and still can’t see the results. Well then try out rowing machines. This rowing machine works out on six major different muscles at every stretch and gives you perfect and desired results. They don’t only stretch your muscles out, but also help you to burn more calories. This machine works largely on you back and makes you 24 hours fit and going.

They work on deltoids, pectorals major, Rectus abdomens, Internal and external Oblique’s, Triceps, Biceps, Hamstrings and Quadriceps. These muscles make your bodies most visible parts. Just working out on them you can make a sweet and smart body. With the introduction of rowing machine many companies have come up with their products. We have brought out rowing machine reviews for you to decide the best.

Rowing machine types:

1. Air Rowers

Today’s most air rower uses fan air rower resistance to meet all availability levels. These rowers provide most important difficulty levels from beginner level to pro level. Depending upon the brand they may or may not be noisy. They are not purely silent because of its paddling and spinning blade.

Features:

· Flywheel adjustable resistance

· Flexible handling

· Easy workout

· Footrest design with frame lock

2. Water Rowers

This type rower is latest and trendy rowers in the market today. Though priced on a higher side, but its looks and finished woodwork shall make you work a little longer. This is well known for its better dynamics. Water rowers cast themselves into your strength and power.

Features:

· Robust design

· Efficient dynamics

· Ease of handling

· Sliding seat

3. Magnetic Rower

This is a new concept to market. The old fashion flywheel was stopped with physical force. This is replaced by flywheel with magnets which helps to stop the wheel easily. The magnet is not in contact with moving parts. Being new to market this is hardly used, but has the potential to build your body. This has only one demerit which is a reduction in force on your body which should not be the case in rowing.

Features:

· Electromagnet for force reduction

· Flywheel dynamics

· Easy handling

4. Hydraulic rower:

Are you looking for rowing machine which suits your budget. Then a hydraulic rower is best for you. This is an award winning machine for its cost effective result. Hydraulic rower is completely manually controlled and needs user to work attentively. Due to its cost effectiveness nature some of them are not durable. Hence, choose wisely between the products. Some of them have also reported to cause burning sensation on the skin after use.

Features:

· Hydraulic rowing

· Low cost

· Tough handling

Some features you must see before buying a rowing machine such as:

1. Monitoring System: These systems generally have features such as calorie meter, heart beat measurer and duration of workout which helps you access yourself better,

2. Moving parts: These parts put a lot of pressure on your body if they do not run properly. Choose between them wisely

3. Assembly system: Assembling the rowing system is another tough job. You must choose one of the rowing machine which could be easily assembled.

Posted in Uncategorized | Comments Off

What Are Vinyl Weights And What Are They Made Of?

Most weightlifters and bodybuilders use various types of weights like cast iron weights, chrome weights and vinyl weights. Though the main purpose of all these weights is to allow the bodybuilder to do an extensive workout to build their body stronger and fitter but still they are different from each other in shape, style, looks and colours. Here in this write-up brief information about vinyl dumbbells will be provided to know them more closely, if you are not familiar with them.

Introduction with vinyl weights

Vinyl dumbbells or weights are the workout weights made of solid concrete covered with a material made of hard plastic. It will be a good option for you to start your weight training if you are new in this field. The main reason for the newbies to start with vinyl weights is that they allow them to practice according to their form and perform properly for all types of weight exercises. Lifting weights properly is actually the most important part of weight training but the best way to lift the weights is still a debatable question.

What are they?

The concrete dumbbells coated with durable vinyl are used for various upper class extreme workout exercises. They are normally used to prevent any functional injury or rehabilitation of the weight trainer. Being coated with vinyl these dumbbells available in various weight levels are durable. You can use them according to the strength of your arms.

How are vinyl dumbbells made?

Basically they are made of concrete and vinyl is coated on them to give them a smooth and elegant look. They are made in different sizes and weights so that everyone can use them according to his/her own weight lifting potential.

Packing of vinyl dumbbells

The dumbbells are packed in pair to make it easy to carry and store for the user. They are usually packed in 2 kg, 4 kg, 6 kg and 10 kg packs containing 2 pieces of 1 kg, 2 kg, 3 kg and 5 kg in each respectively.

Manufacturing of vinyl dumbbells

Manufacturing of the dumbbells is a step by step process. First of all a cast iron mould is prepared according to the size and style of the dumbbell you want to manufacture. The moulds are created somewhat lighter in weight than the weight of finished dumbbell you want as the coating of vinyl also has some weight which will be added to the initial weight of cast iron mould.

The second step is to dip the cast iron mould of the dumbbell into hot vinyl in molten form so that its coating can cover up the entire mould. Molten vinyl is used in different colours to give the final iny dumbbells a unique and attractive look.

Machines used in manufacturing

In order to manufacture quality vinyl dumbbell cast iron moulding machines of highest quality are used to manufacture dumbbells of exact size and weight. Vinyl is basically manufactured with the help crude oil and salt. Ethylene is obtained by cracking crude oil or petroleum and chlorine by electrolytic dissociation of salt to manufacture vinyl.

Posted in Uncategorized | Comments Off

Prescription Drug Abuse

When a prescription drug is used in quantities more than the recommended dosage or when not required, it is termed drug abuse. Painkillers, tranquilizers and anti-anxiety drugs are some of the most commonly abused prescription drugs.

Generally, patients take medicines as prescribed by their doctors. When taken this way, there is very little chance of the patient getting addicted. According to the National Institute on Drug Abuse (NIDA), millions of people today use medications for non-medical purposes.

People try to justify drug abuse by convincing themselves that an overdose of prescription drugs is not as bad as street drugs such as heroin or ecstasy. The truth is that any kind of abuse is unwarranted. The problem with prescription drug abuse is that it starts with the consumption of a few extra pills for quick relief. The patient does not realize that abuse or addiction is likely.

If the doctor discontinues the prescription, an addict will seek out another doctor for a prescription of the same drug under false pretexts. Abusers use various methods to get a high. They even mix prescription drugs with alcohol, marijuana or any other similar drug. Drugs such as Ritalin and OxyContin are among the most abused drugs. Prescribing these drugs is carefully monitored and given only when urgently required.

To battle prescription drug abuse, medication directions must always be followed carefully. The physician must always be consulted regarding any change in dosage. It is not advisable to crush the tablets or take them with alcohol or any other intoxicating substance. Also, patients must never use someone else?s prescription, even if the symptoms are similar. The doctors should also exercise caution while prescribing drugs with any possibility of abuse. They must ask patients if they have any history of drug abuse.

Prescription drug abuse can be tackled with regular counseling. There is a lot of information on the Internet, and local physicians are always available for consultations.

Posted in Uncategorized | Comments Off

Drug Abuse Solutions

Drug abuse today is a major cause for concern and has a negative effect on society at large. Though students constitute a large segment of drug abusers, adults also succumb to drug abuse. There is a tendency amongst middle-aged people to abuse prescription drugs.

The first step towards combating drug addiction is to make the abuser aware of the damage it causes the body. Most addicts lack confidence and must be taught to become a master of the situation and not a slave to addiction.

There are many institutions and organizations that help drug abusers kick the habit. The support of friends and family is of prime importance. First and foremost, an abuser must be committed to giving up drugs. Doctors and counselors are a drug abusers greatest ally in the battle against addiction.

People who realize they have to quit this dangerous habit may be too embarrassed or afraid to confide in anyone. They might even be worried that they will land into trouble if they admit to having this problem. Abusers must talk to anyone they trust.

Drug abuse solutions can be viewed from many perspectives. On a national level, solutions are based and discussed in terms of the reduction in supply of drugs. From a social perspective, solutions are usually discussed in terms of prevention, early intervention and treatment.

Prevention is better than cure. This adage holds good in fighting drug abuse too. Public education campaigns and stricter laws regarding purchase and use of legal substances are measures that have been adopted by states in the USA.

Many States have created coalitions of community and business leaders to address the problem of substance abuse. These groups run community-based programs that provide mentoring, tutoring, alternative activities, and life skills development for youth in drug-impacted neighborhoods.

Posted in Uncategorized | Comments Off